Liability For Material Defects; Service, Repair; Decommissioning, Disposal - MICRO-EPSILON C-Box/2A Operating Instructions Manual

Liability for Material Defects

7.
All components of the device have been checked and tested for functionality at the factory. However, if de-
fects occur despite our careful quality control, MICRO-EPSILON or your dealer must be notified immediately.
The liability for material defects is 12 months from delivery. Within this period, defective parts, except for
wearing parts, will be repaired or replaced free of charge, if the device is returned to MICRO-EPSILON with
shipping costs prepaid. Any damage that is caused by improper handling, the use of force or by repairs or
modifications by third parties is not covered by the liability for material defects. Repairs are carried out exclu-
sively by MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain unaffected. In particular,
MICRO-EPSILON shall not be liable for any consequential, special, indirect or incidental damage. In the inter-
est of further development, MICRO-EPSILON reserves the right to make design changes without notification.
For translations into other languages, the German version shall prevail.
8.
If the controller is defective:
If possible, save the current C-Box/2A settings in a parameter set
on your PC, see Chap. 5.5.15, to reimport them into the C-Box/2A
after the repair. The opening of the C-Box/2A is only subjected to
the manufacturer. In the cause of a fault cannot be clearly identi-
fied, please send the entire measuring system to:
9.
Incorrect disposal may cause harm to the environment.
C-Box/2A
Liability for Material Defects

Service, Repair

Decommissioning, Disposal

Remove all supply and output cables from the C-Box/2A.
Dispose of the device, its components and accessories, as well as the packaging materials in compli-
ance with the applicable country-specific waste treatment and disposal regulations of the region of use.
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Str. 15
94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0
Fax +49 (0) 8542 / 168-90
info@micro-epsilon.de
www.micro-epsilon.com
Page 74