Measuring Rate - MICRO-EPSILON C-Box/2A Operating Instructions Manual

Operation
5.5.5

Measuring rate

Fields with a grey
background re-
quire a selection.
In this view, you can change via the link
Dark bordered
nization
fields require the
Value
specification of a
nization
value.
C-Box/2A
Measuring Rate
Preferences
Go to the menu
Current synchroniza-
tion mode
Measuring rate
and there change the synchronization mode, e.g. select between the modes
Internal synchronization
,
Measuring rate
> .
No synchroniza-
tion
Internal synchroni-
zation
External synchroni-
sation
Value
Change synchronization mode
External Synchronization
and
Synchronization off. The measuring
rate can be entered freely.
Value range: from 0.4 to 80 kHz. Oth-
erwise the available measuring rates
are given by the connected sensors/
controllers, see Fig. 19.
The C-Box/2A is the time basis.
The synchronization signal is gener-
ated by an external signal source, e.g.
function generator.
kHz; , see also the following table
Synchro-
into the view
No synchro-
.
Page 36