MICRO-EPSILON C-Box/2A Operating Instructions Manual page 43

Hide thumbs Also See for C-Box/2A:

Table of Contents

Operation

Here the data can be selected, which should be transmitted over the digital interfaces.

Out of the sum of all available data, the one which is required for further processing can be selected. This

data is then output one after the other in a defined chronology. You will find information about the data format,

the output sequence and more details in the MEDAQLib documentation of MICRO-EPSILON.

In the figure above, the measuring program

lected, that means only one sensor is connected to the C-Box/2A.

Over the link

measurement, see Chap. 5.5.3.

Please use the C-Box/2A-Tool. You will find the C-Box/2A-Tool on the MICRO-EPSILON website under

https://www.micro-epsilon.de/accessories/C-Box-2A/

C-Box/2A

Change measuring program

Measuring value sensor 1, see

you can operate a further sensor for the thickness or step

Fig. 20

, is se-

Page 43

Table of Contents

Need help?

Do you have a question about the C-Box/2A and is the answer not in the manual?