MICRO-EPSILON C-Box/2A Operating Instructions Manual page 70

Operation
The left window shows the following functions:
1
2
3
4
5
6
7
8
9
10
C-Box/2A
Measuring to be effected
The
cated. You can adjust the measuring program again and confirm with
Measuring program, see Chap.
updated in the submenu
Indicates whether Mastering is
reset the master value and confirm with
ing / Mastering, siehe Kap.
The master value can be changed here, see Chap. 5.5.7. The
0
channel to zero, when is entered in the field
Shows which measured value averaging has been set in the C-Box/2A, see Chap. 5.5.6. The measu-
red value averaging can also be changed.
Confirm the new value with Submit.
The corresponding setting in the submenu
the C-Box/2A
is automatically updated.
Over the diagram the actual measured values of sensor 1, sensor 2 and C-Box/2A are additionally
shown.
Switch on Automatic scaling of the y
axis:
Switch on Manual scaling:
Display of the measured values
Currently displayed time range on the x-axis (in s).
Show
The checkbox specifies which channels (sensor 1, sensor 2, C-Box/2A) are displayed in the
Autozero
diagram. The checkbox sets the selected channel to zero in the diagram.
Start
Press the button to start the measured value display. Press the button
sured value display. After stopping, you can submit the measurement values to the PC by clicking the
Save
button. The Windows selection dialog for the file name and the memory place opens, in order to
save the selected measured values into a CSV file.
, which you have already selected, see Chap. 5.5.3, is indi-
ACTIVE INACTIVE, see Chap.
or
Submit
. It is automatically updated in the submenu
5.5.7
.
Master value in mm
Filter/Averaging/Error handling inside
Automatic
Select
Manual
Select
Automatically the lowest and highest value of the scaling of
the y axis appears.
Die Y axis can be scaled manually.
Submit
. It is automatically
5.5.3
.
5.5.7
. Here, you can set or
Mastering
button resets the selected
.
from the drop-down menu.
from the drop-down menu.
Stop
to stop the mea-
Zero-
Page 70