Removing A 1.8-Inch Ssd From A 1.8-Inch Ssd Carrier - Dell HHB Owner's Manual

Related tasks
Removing a 2.5-inch hard drive or SSD from a 2.5-inch hard drive or SSD carrier
Related reference
Safety instructions

Removing a 1.8-inch SSD from a 1.8-inch SSD carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product.
Follow the safety guidelines listed in safety instructions section.
Steps
Pull the rails on the side of the carrier and lift the SSD out of the carrier.
Results
Figure 50. Removing a 1.8-inch SSD in a 1.8-inch SSD carrier
1. SSD carrier
2. SSD
Next steps
Install a 1.8-inch SSD in a 1.8-inch SSD carrier.
Related tasks
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
Related reference
Safety instructions
98 Installing and removing blade components