Startup Wizard - Honeywell HVAC232 Series Applications Manual

4.2

Startup Wizard

Honeywell HVAC232/402 runs the startup wizard at initial power-up and
whenever the drive is reset to factory defaults.
The Start-up wizard content is shown below. It always asks the basic param-
eters (P1.1-P16.1). If you activate the fire mode parameters with P16.1, it
will go through rest of the Fire mode parameters.
Start-Up Wizard Parameter Group
P1.1 Motor Nominal Voltage
P1.2 Motor Nominal Frequency
P1.3 Motor Nominal Speed
P1.4 Motor Nominal Current
P1.5 Motor Cos phi (Power Factor)
P1.7 Current Limit
P1.23 Energy Optimization
P3.1 Min. Frequency
P3.2 Max. Frequency
P16.1 Active Fire Mode Parameter Group
P18.1 Fire Mode Password
P18.2 Fire Mode Frequency Select
P18.3 Fire Mode Frequency Preset
P18.4 Fire Mode Activation Close
P18.5 Fire Mode Activation Open
P18.6 Fire Mode Reverse
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07 34