Application Setting (Control Panel: Menu Par  P16) - Honeywell HVAC232 Series Applications Manual

External temperature limit
Considered when P15.1 = 4.
Pre heat current is active when the external temperature is below this value.
If more than one temperature input is configured in P15.4, the maximum
measurement will be considered.
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07
10.15 Application setting
(Control panel: Menu PAR
Active fire mode parameter group
This parameter is visible only when start wizard is active. With this parame-
ter you can enable/disable fire mode parameters during start wizard.
Application access password
Input the right password could review parameter group 18.
P16)

131