Download Table of Contents Print this page

Honeywell HVAC232 Series Applications Manual page 139

Advertisement

Table of Contents
Control
Control method
characteristics
Switching frequency
Frequency reference
Field weakening point
Acceleration time
Deceleration time
Braking torque
Ambient
Ambient operating tem-
conditions
perature
Storage temperature
Relative humidity
Air quality:
• chemical vapours
• mech. particles
Altitude
Vibration:
EN60068-2-6
Shock
IEC 68-2-27
Enclosure class
Pollution degree
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07
Frequency Control U/f
Open Loop Sensorless Vector Control
1 ... 16 kHz; Factory default 4 kHz
Resolution 0.01 Hz
30 ... 320 Hz
0.1 ... 3000 sec
0.1 ... 3000 sec
100% × T
with brake option (only in 3~ drives sizes MI2-5)
N
30% × T
without brake option
N
14 °F (–10 °C) (no frost) ... +104/122 °F (+40/50 °C) (depends on the unit size): rated loadability I
Side by side installation for MI1-3 it is always 104 °F (40 °C);
For IP21/Nema1 option in MI1-3 the maximum temperature is also 104 °F (40 °C)
–40 °F (-40 °C) ... +158 °F (70 °C)
0 ... 95% RH, non-condensing, non-corrosive, no dripping water
• IEC 721-3-3, unit in operation, class 3C2
• IEC 721-3-3, unit in operation, class 3S2
• 100% load capacity (no derating) up to 3281 ft. (1000 m).
• 1% derating for each 328 ft. (100 m) above 3281 ft. (1000 m);
• max. 6562 ft. (2000 m)
• 3 ... 150 Hz
• displacement amplitude 1(peak) mm at 3 ... 15.8 Hz max
• acceleration amplitude 1 G at 15.8 ... 150 Hz
• UPS Drop Test (for applicable UPS weights)
• Storage and shipping: max 15 G, 11 ms (in package)
IP20 for MI1-3, IP21 for MI4-5 or MI-1-3 with accessory COMP-IP21-KIT# / COMP-NEMA1-KIT#
PD2
N
139

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents