Group 1 - 5; Drive status
1. Drive is ready to start(READY)
2. Drive is running(RUN)
3. Drive has stopped(STOP)
4. Alarm condition is active(ALARM)
5. Drive has stopped due to a fault(FAULT)
Group 6 - 10; Control selections
When API is operated by PC control, there are no arrowhead at I/O, KEYPAD
and BUS.
6. Motor is rotating forward(FWD)
7. Motor is rotating reverse(REV)
8. I/O terminal block is the selected control place (I /O)
9. Keypad is the selected control place (KEY- PAD)
10. Fieldbus is the selected control place(BUS)
Group 11 - 14; Navigation main menu
11. Reference main menu(REF)
12. Monitoring main menu(MON)
13. Parameter main menu(PAR)
14. System main menu(SYS)
Application manual HVAC232/402 | Document 27-652 | Issue ENG06 | 2019-08-07
1
2
11
12
13
14
6
7
STOP
Fig. 37. HVAC232/402 Control panel
3
4
5
8
9
10
START
MCR36494
45