Channel Function "2Byte Threshold - HDL M/R4.16.1 Manual

HDL KNX / EIB
If the value of receiving telegram from bus more than the upper
threshold value, the switch will action according to below option ( ON
or OFF or no action)
Options: Unchange
Unchange: The channel switch position no change.
ON: The channel switch position set to ON.
OFF: The channel switch position set to OFF
3.5.5.2 Channel function "2bytes threshold"
Fig11: 2byte Threshold type function windows
2bytes Threshold function is same as the 1byte threshold function.
---Enable change threshold 1 over bus:
Options: YES
NO: Do not allow change threshold1 via bus.
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
ON
OFF
NO
Switch Actuators
www.hdlchina.com
31/58