Channel Mode "Switch Actuator - HDL M/R4.16.1 Manual

HDL KNX / EIB

3.5 Channel mode "Switch Actuator"

Fig3: Switch Actuator windows
---Normally connected type
---Response of switch state ON/OFF
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
More functions setup in this mode, the following section will
description detailed of the Switch Actuator mode.
This parameter is the choice of the type of access load
Options: Normally Closed:
Normally Opened
Normally Closed: Access of the load type normally OFF state is
closed.
Normally Opened: Access of the load type normally OFF state is
opened.
This parameter is the choice of the switching state feedback
Options: No response
Always response
Switch Actuators
www.hdlchina.com
16/58