Maintenance And Cautions - HDL M/R4.16.1 Manual

HDL KNX / EIB
Note: a) Dimensions of the space to be provided for each switch

2.4 Maintenance and Cautions

_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
6 Additional power DC24V (Max.24mA in operate , Min. 4mA in
standby) optional
b) Dimensions and position of the means for supporting and fixing the
switch within this space
c) Minimum clearance between the various parts of the switch and
the surrounding parts where fitted
d) Minimum dimensions of ventilating opening , if needed, and their
correct arrangement.
e) The protective devices (e.g. fuses, automatic protective devices,
etc.) to be connected to the load to avoid overloading
*Please read this user manual carefully before any operation.
*Don't close to the interfering devices.
*The site should be ventilated with good cooling environment.
*Pay attention to damp proof, quakeproof and dustproof.
*Avoid rain, other liquids or caustic gas.
*Please contact professional maintenance staff or HDL service center
for repair or fix.
*Remove the dust regularly and do not wipe the unit with the volatile
liquids like alcohol, gasoline, etc.
*If damaged by damp or liquid, turn off it immediately.
*Regularly check the circuitry and other related circuit or cables and
replace the disqualified circuitry on time.
*For security, each circuit to connect an MCB or fuse
*Installation location should be well-ventilated, pay attention to
moisture, shock, dust proof.
Switch Actuators
www.hdlchina.com
11/58