Blinds - HDL M/R4.16.1 Manual

HDL KNX / EIB

5.4 Blinds

_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
The blinds function need two channels for driver, the first
channel control blinds UP, and the second channel control
blinds DOWN.
Channel A
Channel B
In the above combination. If start running the blinds UP,then
channel A switching ON and the channel B switching OFF.
If start running the blinds DOWN, then channel B switching
ON and the channel A switching OFF.
when running time out, the channel A and the Channel B will
switch OFF together.
UP/Adjustment :
DOWN/Adjustment : A→OFF
Stop : A→OFF
B→OFF
Other combinations are similar to the here.
Switch Actuators
A→ON
B→OFF
B→ON
www.hdlchina.com
TOP
UP
Down
Bottom
52/58