Objects "Alarm For On Time Out; Objects "R/W Statistics Counter; Objects "Alarm For On Counter Out; Objects "Flashing - HDL M/R4.16.1 Manual

HDL KNX / EIB

4.2.3 Objects "Alarm for ON time out"

NO. Object name
Output N
13
This communication object is used for alarm when ON time out set range.
Table 7 Alarm statistics ON time (1bit)

4.2.4 Objects "R/W statistics counter"

NO. Object name
Output N
14
This communication object is used for statistics ON counter of the channel "N". it can be
read/wrote via bus by setting this function activity
Table 8 Read/write statistics ON counter (4bytes)

4.2.5 Objects "Alarm for ON counter out"

NO. Object name
Output N
15
This communication object is used for alarm when ON counter out set range.
Table 9 Alarm statistics ON counter (1bit)

4.2.6 Objects "Flashing"

NO. Object name
Output N
16
This communication object is used for start or stop switch flashing.
Table 10 Flashing
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
Function
Alarm for ON time
out
Function
Read/write
statistics for
counter
Function
Alarm for ON
counter out
Function
Flashing
Switch Actuators
Flags
C R T
Flags
C R W T U
Flags
C R T
Flags
C W U
www.hdlchina.com
Data type
EIS1
DPT 1.005
1bit
Data type
DPT 12.001
4bytes
Data type
EIS1
DPT 1.005
1bit
Data type
EIS1
DPT 1.001
1bit
44/58