A R D W A R E; Technical Data - HDL M/R4.16.1 Manual

HDL KNX / EIB
2- Hardware
The technical properties of HDL KNX/EIB
Switch Actuators as the following sections.

2.1 Technical data

Power supply
*Operating voltage(supply by the bus)
* Current consumption EIB / KNX(operate)
* Current consumption EIB / KNX(standby)
* Power consumption EIB / KNX(operate)
* Power consumption EIB / KNX(standby)
Output nominal values
* Type of Device M/R
* Number of contacts
* In rated current
* Power loss per device at max. load
* Un rated voltage
Output switching currents
* AC operation (cos = 0.8)
* Fluorescent lighting load
* Minimum switching capability
DC current switching capability (ohmic load)
Output life expectancy
* Mechanical Life
* Electrical Life (240 V/cos = 0.8)
Output switching delay without additional DC power
* Max. delay time of relay per position changes (charge time of the capacity)
Note: it has voltage(capacity of relay driver) detect function in device ,it stop active and
keep the state of relays in the memory of device when the voltage is going to down
to stop level so this function can prevent the relay is not active success ,the relays
can active again in according to the state of relays in memory when the voltage
(capacity of relay driver) is going to up to active level , this function is very useful for
without additional DC power application in system , and the delay time is approx
0.4s on switch state change when the charge of the capacity is not enough.
Output switching delay with additional DC power
* Max. delay time of relay per position changes (charge time of the capacity)
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
Switch Actuators
21...30 V DC,
< 15 mA
< 5 mA
< 450 mW
< 150 mW
4.16.1 8.16.1 12.16.1
4 8
16 A 16A
2.7 W 5.4W
250/440V AC (50/60 Hz)
12A / 230 V
16 A / 250 V (150 μF)
0.1mA/1V
16 A / 12 V DC
> 1000000
> 100000
4.16.1 8.16.1 12.16.1
400ms 400ms 400ms
8.16.1 12.16.1
100ms
www.hdlchina.com
12
16A
8 W
100ms
6/58