Channel Function; Channel Function Parameter - HDL M/R4.16.1 Manual

HDL KNX / EIB

3.5.1 Channel function

3.5.2 Channel function parameter

Fig4: Channel function windows
---Enable function "time"
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
OFF: The channel position will switch OFF after bus voltage recovery.
Show the function page
If this parameter is activated, and channel function page will be
showed. The function page Include Time, Scene, Threshold, Blinds
and Logic. Details see the following sections.
The following will describe detail the functions parameter setup of the
channel.
In normal case, The each channel function is disabled, If enabled and
the channel function will be valid.
If set to Enable, and the time function will be enable .
Options: Disable
Enable
Disable: disable time function.
Switch Actuators
www.hdlchina.com
19/58