HDL M/R4.16.1 Manual page 37

HDL KNX / EIB
--- Function of logic block2
---Object value of logic connection 2 after bus voltage recovery
---Result of logic block 2 inverted
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
Disable: disable logic connection2
Enable: enable logic connection2
This logic block allow select as "AND" or "OR" or "XOR" or "GATE"
for Boolean calculation by user
Options: AND
OR
XOR
GATE
AND: Boolean calculation according to "AND" rule
OR: Boolean calculation according to "OR" rule
XOR: Boolean calculation according to "XOR" rule
GATE: "Out" Keep state as before when value of "Con2" set to 0 .
Output of logic block1 pass through to "Out" of logic block
when value of "Con2" set to 1 .
The value of the parameter of logic connection2 initial by bus voltage
recovery .
Options: 0
1
0: Initialization logic connecttion2 value to 0.
1: Initialization logic connection2 value to 1.
setting this parameter to YES, the output of connection2 will be
inverted.
Options: NO
YES
NO: Result of block not inverted.
YES: Result of block inverted.
Switch Actuators
www.hdlchina.com
37/58