Download
Share
Print this page
HDL -MWM70-RF.12 Data Sheet / Manual
  1. Manuals
  2. Brands
  3. HDL Manuals
  4. Controller
  5. HDL-MWM70-RF.12
  6. Data sheet / manual

HDL -MWM70-RF.12 Data Sheet / Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
Parameters
Electrical Parameters:
Rated voltage
Voltage range
Slave interface
Rated power
Rated torque
Rated speed
Rail belt speed
Communication
Wireless transmit power
Wireless receive sensitivity
Indoor communication distance
RSSI receive signal intensity
Factory frequency
Environmental Conditions:
Working temperature
Working relative humidity
Storage temperature
Storage relative humidity
Approved:
CE
RoHS
Product Information:
Dimensions
Weight
Housing material
Installation
Protection
Insulation
Wireless central frequency:
(China) WPAN
(Europe) SRD
(North America)
Default band
Default PSK
Professional Home and Building Automation
www.hdlautomation.com
AC220V 50Hz
AC220V±20% 50HZ
6P internet port
70W
1.0Nm
112rpm
16cm/s
Wireless
+10dbm
-90dbm
30m(barrier free)
>-80dbm
Band, PSK (Suggestion: your
setting should not be same as
the factory setting)
-5℃~45℃
<95%
-20℃~+60℃
<93%
284×70×50（mm）
1352g
ABS, aluminum
Wall hanging
IP41
E
780MHz to 786MHz
864MHz to 870MHz
904MHz to 928 MHz
780MHz
HDL-SecurityKey0
Overview
HDL-MWM70-RF.12
is the wireless curtain motor, which is
configured by HDL-MCIP-RF.10. It can control the curtain
to open, close, stop and percentage control. And it has over
load protection and over heat protection.
Functions
The distance testing of curtain.
■
Drag mode: No action, Long drag, short drag.
■
Percentage control.
■
Communication: wireless.
■
Supports online upgrading.
■
Supports easy programming.
■
Built-in new generation clutch, precise planetary. And
■
noise level is 40dB.
Dry contact switch, it can control the curtain to open,
■
close, stop.
Suitable for all small to medium-scale curtain applications,
■
linear and arched, one-and two-side opening.
Important Notes
Horizontal pull is 8Kg, maximum load is 50Kg.
■
It should configure by HDL-MCIP-RF.10.
■
Installation Steps
Install the rail
■
Install the curtain motor
■
Connect with MCIP-RF.10
■
Curtain setting
■
Do you need help? Contact with us
support@hdlchina.com.cn
Wireless curtain motor
HDL-MWM70-RF.12
1/ 7

Advertisement

loading

Related Manuals for HDL HDL-MWM70-RF.12

Summary of Contents for HDL HDL-MWM70-RF.12

  • Page 1 +10dbm HDL-MWM70-RF.12 is the wireless curtain motor, which is Wireless receive sensitivity -90dbm configured by HDL-MCIP-RF.10. It can control the curtain Indoor communication distance 30m(barrier free) to open, close, stop and percentage control. And it has over >-80dbm RSSI receive signal intensity load protection and over heat protection.

  • Page 2: Dimensions And Wiring

    Wireless curtain motor HDL-MWM70-RF.12 Dimensions and wiring Unlock LED indicator Latch Programming button Lock 6P interface Motor terminal Motor terminal: Pull the latch to unlock direc- tion, and then insert the motor terminal into the Latch C-Driver Unit. Then, put the latch into the locked hole.

  • Page 3: Step 2 Wireless Setting

    Step 2 Wireless setting Press the programming button 3 times, green LED will flash quickly and the wireless curtain motor enters gateway setup mode. ■ Open HDL-BUS Pro Setup Tool, search wireless gateway, choose Node configuration. ■ Click the ”enter gateway setup mode”.
  • Page 4 Wireless curtain motor HDL-MWM70-RF.12 Step 3 Curtain basic information Remark: indicate some information. Modify subnet ID: can read and modify the subnet ID and device ID of curtain, and the subnet ID of curtain should be same as the gateway.
  • Page 5 Wireless curtain motor HDL-MWM70-RF.12 Step 5 Testing for installation Method one: （1）Keep pressing the button for 5S, the LED will flash 1 time/2S, the curtain enters into the testing mode. （2）The motor will measure moveable distance for the rail automatically (Open-close), when the motor stops, finish.
  • Page 6 Wireless curtain motor HDL-MWM70-RF.12 Step 7 Test Curtain switch: set the curtain status. (stop, open, close or percentage) After testing, when the curtain opens or closes, casement is maybe extruded or the opening position is wrong (the curtain has stopped even if it is not fully opening.) Now, you should adjust the opening and closing position again by “Adjust ON/OFF”.

  • Page 7: Step 9 Easy Programming

    The wireless curtain motor can work with DLP panel, there are two ways for control: Setting 1: The button setting is shown as follows.(HDL-BUS Pro Tool Setup) Operation: (Parameter 1 is “1(switch no.)”, parameter 2 is “on”, “off”, “stop” or “percentage”...