Channel "Heating Actuator - HDL M/R4.16.1 Manual

HDL KNX / EIB

3.5.8 Channel "Heating Actuator"

Fig14: Heating Actuator windows
The channel will work at PWM mode. The PWM control by 1bit or
--- Normally connected type
Normally Closed: Normally close heating.
Normally opened: Normally open heating.
---The switch state on bus voltage failure:
It has three option can be set by user
Options: Unchange
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
1byte.
Options: Normally Closed
Normally opened
ON
Switch Actuators
www.hdlchina.com
38/58