HDL M/R4.16.1 Manual page 39

HDL KNX / EIB
---The operation of switch after bus voltage recovery
---Save statistic for ON switching 'counter(4bytes)'
>>:->Alarm for counter out
>>:--Alarm when counter our(10..10000000)
>>:--Alarm telegram interval when counter out(1..255s)
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
OFF
Unchange: The channel switch position unchanged after bus voltage
failure
ON: The channel position will switch ON after bus voltage
failure
OFF: The channel position will switch OFF after bus voltage
failure
It has four option for bus voltage recovery also as below
Options: Unchange
Recovery
ON
OFF
Unchange: The channel switch position unchanged after bus voltage
recovery.
Recovery: After bus voltage recovery, the channel switch position will
come back to the state of the power-down previous.
ON: The channel switch position will be set to ON after bus voltage
recovery.
OFF: The channel switch position will be set to OFF after bus voltage
recovery.
Statistical channel switch ON counter.
Options: Disable
Enable
Disable: Disable Statistics ON counter
Enable: Enable Statistics ON counter
Options: No
Yes
No: Not alarm
Yes: Alarm
This parameter set the ON alarm overflow time.counter
Options: 10..10000000
Switch Actuators
www.hdlchina.com
39/58