Communication Objects Description; Objects"General" And "Ouput N; All Objects With Channel "N - HDL M/R4.16.1 Manual

HDL KNX / EIB

4-Communication objects description

4.1 Objects "General" and "Output N"
NO. Object name
General
0
This communication object is always active and valid. invert the value send telegram to
bus in next frame. e.g. last telegram value is "1", the next telegram value is "0"
Table 3.General object
NO. Object name
Output N
10,30...
These communication objects of the channel output used for ON/OFF an channel, the
switch output ON when the object receive the value is "1". the switch output OFF when
the object receive the value is "0"
Table 4 Output objects

4.2 All objects with channel "N"

_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
In this section will introduce the communication objects, The objects
will show by setting the function enable .
Note: In following sections the N=A,B,C...
Function
Send cycles
Function
Channel
output
Switch Actuators
Flags
C R T
Flags
C W U
www.hdlchina.com
Data type
EIS1
DPT 1.003
1bit
Data type
EIS1
DPT 1.001
1bit
42/58