Channel Function "Time-Flashing - HDL M/R4.16.1 Manual

HDL KNX / EIB

3.5.3.1 Channel function "Time-Flashing"

---Time for on:(0...255 Min)
---Time for on:(0...59 Sec)
---Time for off:(0...255 Min)
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
Fig6: Time-Flashing function windows
Switch will flashing between ON and OFF in this mode.
Condition of flash start/stop
Three Control mode for this function .
Options:Start with ON, stop with OFF
Start with OFF, stop with ON
Always flash, start with ON/OFF
Start with ON, stop with OFF: Start flashing with ON and stop
flashing with OFF.
Start with OFF, stop with ON: Start flashing with OFF and stop
flashing with ON.
Always flash, start with ON/OFF: Start flashing with ON or OFF.
Duration minutes in the ON state.
Duration seconds in the ON state.
Duration minutes in the OFF state.
Switch Actuators
www.hdlchina.com
22/58