Objects "Logic; Objects "Heating - HDL M/R4.16.1 Manual

HDL KNX / EIB

4.2.13 Objects "Logic"

NO. Object name
Output N
26
If this function has been actived , this communication object will show and the logic
function is valid. The logic function include : AND,OR,XOR,GATE.
Output N
27
If this function has been actived, this communication object will show and the logic
function is valid. The logic function include : AND,OR,XOR,GATE.
Table 17 Logic

4.2.14 Objects "Heating"

NO. Object name
Output N
10
If work in heating actuator, this communication object default is valid. Start PWM by
receiving telegram "1",stop PWM by receiving telegram "0" , start running automatic when
power on, and set by ETS
Output N
10
If select "heat with byte control", this communication object is valid. Can change valve of
PWM by receive 1byte data. Output ON if receiving value is 255 , output OFF if receiving
value is 0, otherwise output PWM according to the value of receiving telegram from bus.
Table 18 Heating actuator
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
Function
Logic connection 1
Logic connection 2
Function
Heat with 1 bit
control
Heat with 1 byte
control
Switch Actuators
Flags
C W U
C W U
Flags
C W U
C W U
www.hdlchina.com
Data type
EIS1
DPT 1.002
1bit
EIS1
DPT 1.002
1bit
Data type
EIS1
DPT 1.001
1bit
EIS14
DPT 5.004
1byte
48/58