Dmc20 Drive-Cliq Hub - Siemens SIMOTION D410 Manual

7.5

DMC20 DRIVE-CLiQ hub

Features
The DRIVE-CLiQ hub module 20 (DMC20) is used for the star-shaped distribution of a
DRIVE-CLiQ cable.
The module is especially suitable for applications which require DRIVE-CLiQ link nodes to
be removed in groups, without interrupting the DRIVE-CLiQ link cable and therefore the data
exchange.
Caution
The 50 mm clearances above and below the components must be observed!
Additional references
You will find more information on the DMC20 in the
Supplementary System Components
D410
Manual, 03/2007 Edition
SINAMICS S120 Control Units and
Equipment Manual, /2/.
Spare parts/Accessories
7.5 DMC20 DRIVE-CLiQ hub
71