System Components; Table 1-1 System Components - Siemens SIMOTION D410 Manual

1.2

System components

Overview
SIMOTION D410 communicates with the components of the automation landscape via the
following interfaces:
• PROFIBUS DP (SIMOTION D410 DP only)
• PROFINET (SIMOTION D410 PN only)
• DRIVE-CLiQ (DRIVE Component Link with IQ)
• Power Module Interface (PM-IF)
The most important system components and their functions are listed in the following table.
Table 1-1
Components
SIMOTION D410
System software
Power supply (PS)
D410
Manual, 03/2007 Edition
System components
Function
... is the central motion control module.
The module contains the programmable SIMOTION Runtime in
SIMOTION D410 and the SINAMICS S120 drive software.
You can use the integrated rapid digital I/Os as:
Homing inputs
•
Inputs for measuring inputs
•
User-addressable process inputs/outputs
•
Outputs for fast output cams
•
The measuring sockets can output any analog signals.
The DRIVE-CLiQ interfaces permit a fast connection to the SINAMICS drive
components.
The system software is delivered separately on a CompactFlash card (not
included in the scope of delivery).
Note: An additional license is not required for the real axis technology.
... provides the electronic power supply for SIMOTION D410, e.g., SITOP.
Note: If SIMOTION D410 is to be mounted on the power module, the power is
supplied via the power module (e.g., PM340). The digital outputs of
SIMOTION D410 are not supplied by the power supply.
Description
1.2 System components
13