Connecting
5.8 Connecting the PROFINET interface (410 PN only)
5.8
Connecting the PROFINET interface (410 PN only)
Information on PROFINET
PROFINET is an open component-based industrial communication system using Ethernet
(IEC 61158) for distributed automation systems.
SIMOTION D410 PN supports the following PROFINET communication methods:
• RT
• IRT top
• IRT flex
You will find further information in the System Manual,
Networking
The network is created via shielded twisted pair cables (TP cables). You will find more
information in the Manual,
/14/.
Note
Note that the connector engages when you connect it.
Basic setting
You will find the factory settings for PROFINET addresses in the Commissioning Manual,
SIMOTION D410
54
SIMATIC NET, Industrial Twisted Pair and Fiber Optic Networks
, /1/.
SIMOTION Communication
Manual, 03/2007 Edition
, /10/.
,
D410