Safety Information - Siemens SIMOTION D410 Manual

Description

1.5 Safety information

The following nameplate includes the MAC address of the PROFINET interface (ports X200
and X201) and is located on the front side of the module.
Figure 1-7
Note
The contents of the individual nameplate fields on the current module may differ from those
described in this Manual (e.g., updated product status, approvals and identifications not yet
issued, etc.).
1.5 Safety information
Observe the following safety information when working with SIMOTION D410 and its
components!
Caution
The CompactFlash card may only be unplugged and plugged in when SIMOTION D410 is
switched off (zero current)!
Caution
The 50 mm clearances above and below the components must be observed. The ventilation
openings may not be covered by connecting cables.
22
SIMOTION PN nameplate (example)
D410
Manual, 03/2007 Edition