Mitsubishi Electric CR800 Series Ethernet Function Instruction Manual page 88

3 Description of functions
• Number of devices
Specify the number of devices to be written.
When writing data in bit units
When writing data in word units
• Write data
Specify the value to be written to all the devices specified in "Number of devices" in the request data.
 Request data
There is no Write command response data.
 Communication example (when writing data in bit units)
Write values to M100 to M107.
• When performing data communication in ASCII code
(Request data)
• When performing data communication in binary code
(Request data)
Sub-
command
 Communication example (when writing data in word units (bit device))
Write values to M100 to M131 (data for two words).
• When performing data communication in ASCII code
(Request data)
3-62
Item
Device
Subcommand
code
Device
code
Number of
First device
Write data
devices
No.
Device
Subcommand
code
First device No. Number of devices
First device No. Number of devices
Number of devices
ASCII code Binary code
1 to 3584 devices 1 to 7168 devices
1 to 960 devices
Write data
Write data