Communication - Mitsubishi Electric CR800 Series Ethernet Function Instruction Manual

3 Description of functions

3.1.5. Communication

Communicate with the personal computer support software.
Communication can be carried out with the Ethernet TCP/IP.
Refer to the instruction manual enclosed with the personal computer support software for details on using the personal
computer support software.
If communication is not possible, refer to section "2.3 Checking the connection" and check the state.
CAUTION
3-4
When the robot controller power is turned OFF and ON, the connection will be disconnected
and communication will be disabled.
In this case, end the application software on the personal computer once, and then
restart.