Mitsubishi Electric CR800 Series Ethernet Function Instruction Manual page 116

3 Description of functions
3. Press "Close with Reflecting the Setting" and then select "Yes" on the confirmation dialog box that is displayed.
4. Refresh the settings.
Here the RX/RY/RWr/RWw devices on the link side are assigned to the desired devices on the CPU side.
In the following example RX0 to RX3F (64 points) is assigned to B0 to B3F; RY0 to RY3F (64 points) is assigned
to B1000 to B103F; RWr0 to RWr1F (32 points) is assigned to W0 to W1F; and RWw0 to RWw1F (32 points) is
assigned to W1000 to W101F.
3-90