Multiple Interrupt Select; Phyar: Phy Access; Tbicsr: Ten Bit Interface Control And Status - Realtek RTL8169 Manual

6.17 Multiple Interrupt Select

(Offset 005Ch-005Dh, R/W)
Bit R/W
15:12 -
11:0 R/W
When MulERINT=1, any received packet invokes an early interrupt according to the MISR[11:0] setting in early mode.

6.18 PHYAR: PHY Access

(Offset 0060h-0063h, R/W)
PHY address is fixed at 00001.
Bit R/W
31 R/W
30:21 -
20:16 R/W
15:0 R/W

6.19 TBICSR: Ten Bit Interface Control and Status

(Offset 0064h-0067h, R/W)
Bit R/W
31 R/W
30 R/W
29 R/W
28 R/W
27:26 -
25 R
24 R
23:20
19 -
18:16
15:13 -
12:8
7:4
3:0
2002/03/27
Symbol
-
Reserved
MISR11-0
Multiple Interrupt Select: Indicates that the RTL8169 will make a
receive interrupt after the RTL8169 has transferred the data bytes
specified in this register into the system memory. If the value of this
register is zero, there will be no early receive interrupts before the whole
received packet is transferred to system memory. Bit1, 0 must be zero.
Symbol
Flag
-
RegAddr4-0
Data15-0
Symbol
ResetTBI
TBILoopBack
TBINWEn
TBIReNW
-
TBILinkOk
TBINWComplete
TXOSETST3-0
-
ANST2-0
-
RXST4-0
SYNCST3-0
TXCGST3-0
Flag bit, used as PCI VPD access method:
1: Write data to MII register, and turn to 0 automatically whenever
the RTL8169 has completed writing to the specified MII register.
0: Read data from MII register, and turn to 1 automatically whenever
the RTL8169 has completed retrieving data from the specified MII
register.
Reserved
5-bit GMII/MII register address.
16-bit GMII/MII register data.
Reset TBI: This bit, when set, indicates to the TBI to reset the
interfacing PHY device. This bit is cleared when the reset process is
completed.
TBI Loopback Enable: This bit, when set, indicates to the TBI that
the interfacing PHY device is in loopback mode.
TBI Auto-negotiation Enable: This bit, when set, enables the
auto-negotiation function for the TBI interface.
TBI Restart Auto-negotiation: This bit, when set, restarts the
auto-negotiation. This bit is cleared when the auto-negotiation
completes.
Reserved
TBI Link Ok: This bit, when set, indicates that the channel
connecting to the link partner is established.
TBI Nway Complete: This bit, when set, indicates that the
auto-negotiation process has completed in TBI mode.
Reserved: For Realtek internal testing.
Reserved
Reserved: For Realtek internal testing.
Reserved
Reserved: For Realtek internal testing.
Reserved: For Realtek internal testing.
Reserved: For Realtek internal testing.
28
Description
Description
Description
RTL8169
Rev.1.21