MICRO-EPSILON optoCONTROL 1202 Instruction Manual page 22

TEACH-Function, IN1
When a HIGH-pulse of more than 1.5 s duration is applied, the TEACH function is performed at the receiver.
Digital outputs OUT0 ... OUT2
Characteristics:
- High side/low side switch
- HIGH = +Ub (12 ... 32 VDC),
- LOW = 0 V,
- max. 0.1 A, short circuit proof
The polarity of the digital outputs can only be changed via the parameter „POLARITY" in the software tool:
- POLARITY > DIRECT: Activated digital output is on +UB (+15 VDC ... +30 VDC),
- POLARITY > INVERSE: Activated digital output is on 0 V level.
optoCONTROL 1202 Page 22