Safety; Symbols Used; Warnings - MICRO-EPSILON capaNCDT 6100 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Safety

1.
The handling of the sensor assumes knowledge of the instruction manual.
1.1
The following symbols are used in this instruction manual:
i
1.2
Disconnect the power supply before touching the sensor surface.
>
Static discharge
>
Danger of injury
Connect the power supply and the display/output device in accordance with the safety regulations for electri-
cal equipment.
>
Danger of injury
>
Damage to or destruction of the sensor and/or controller
Avoid banging and knocking the sensor and controller
>
Damage to or destruction of the sensor and/or controller
The power supply may not exceed the specified limits.
>
Damage to or destruction of the sensor and/or controller
Protect the sensor cable against damage
>
Destruction of the sensor
> ailure of the measuring device
F
capaNCDT 6100
Safety

Symbols Used

Indicates a hazardous situation which, if not avoided, may result in minor or moderate
injury.
Indicates a situation which, if not avoided, may lead to property damage.
Indicates a user action.
Indicates a user tip.

Warnings

Page 35

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the capaNCDT 6100 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents