Warranty; Decommissioning, Disposal - MICRO-EPSILON capaNCDT 6100 Instruction Manual

Warranty

7.
All components of the device have been checked and tested for perfect function in the factory. In the unlikely
event that errors should occur despite our thorough quality control, this should be reported immediately to
Micro-Epsilon.
The warranty period lasts 12 months following the day of shipment. Defective parts, except wear parts, will be
repaired or replaced free of charge within this period if you return the device free of cost to Micro-Epsilon.
This warranty does not apply to damage resulting from abuse of the equipment and devices, from forceful
handling or installation of the devices or from repair or modifications performed by third parties.
No other claims, except as warranted are accepted.
Micro-Epsilon will specifically not be responsible for eventual consequential damage. The terms of the
purchasing contract apply in full.
Micro-Epsilon always strives to supply the customers with the finest and most advanced equipment.
Development and refinement is therefore performed continuously and the right to design changes without
prior notice is accordingly reserved.
For translations in other languages, the data and statements in the German language operation manual are
to be taken as authoritative.
8.
The capaNCDT 6100 is produced according to the directive 2002/95/EC („RoHS").
capaNCDT 6100
Warranty

Decommissioning, Disposal

Disconnect the cable for electrical power and output signal on the controller.
Disconnect the cable between sensor and controller.
Do the disposal according to the legal regulations (see directive 2002/96/EC).
Page 60