Table of Contents
Advertisement
3-17.
SPECIAL
PROGRAM
MODE
(CONT.)
Oct. 2005
g.
Press (PROG►) and "SP-8D" shows in the display, if YES
was chosen in step e. "LOCKOUT-HEAT OIL..." and a
temperature (preset at 300ºF (149ºC) show in display. When a
filter lockout occurs, the fryer heats up to this set temperature,
and the display shows "FILTER LOCKOUT/ WAIT". Then
once the set temperature is reached, "FILTER LOCKOUT'/
"YOU *MUST* FILTER NOW" shows in display. Use ▼▲
to change this temperature setting.
h.
Now, go back to the Filter Cycle Mode step of the
Programming section, and program in the number of Cook
Cycles between filtering.
i.
If "3,GLOBAL" is selected, "SP-8A" shows in the display,
and followed by "GLOBAL FILTER CYCLES". The right
side of the display shows a digit, 1 to 99. Press ▼▲ to set the
desired amount of Cook Cycles between filters.
In Cook Mode, the number of global Cook Cycles
remaining shows in the center of the display.
Ex., "--------- 5x ----------".
j.
Press (PROG►) and "SP-8B" shows in the display followed
by "LOCKOUT ENABLED?" and "YES" or "NO". Press
and release ▼▲ to choose YES or NO.
k.
Press (PROG►) and "SP-8C" shows in the display, followed
by "LOCKOUT-HEAT OIL..." and a temperature (preset
at 300ºF (149ºC). When a filter lockout occurs, the fryer
heats up to this set temperature, and the display shows
"FILTER LOCKOUT/WAIT". Then once the set temperature
is reached, "FILTER LOCKOUT'/ "YOU *MUST*
FILTER NOW" shows in display. Use ▼▲ to change this
temperature setting.
l.
Now, go back to the Filter Cycle Mode step of the
Programming section. Press (PROG►) until "FILTER
INCL" shows in the display. Each product must be set to
"YES" to be included in the filter tracking.
49
Advertisement
Table of Contents
