Table of Contents
Advertisement
3-3.
SWITCHES AND
INDICATORS
(CONT.)
Fig. No.
Item No.
3-1
7 & 8
3-1
9
3-1
10
3-1
11
3-1
12
Product Select Buttons
3-1
13
COOK/PUMP Switch
3-1
14
July 2003
Description
▼▲
(PROG►)
Timer Button
Menu Card Window
IDLE Button
Used to adjust the value of the currently displayed setting in the
Program modes
Press to access Program Modes; once in the Program Mode,
it is used to advance to the next setting; if pressed along with
(◄INFO) , it accesses the Information Mode
which has historic information on the operator and fryer's
performance
Used to start and stop Cooking Cycles, and to stop the timer at
the end of a Holding Cycle
The name of the food product associated with each product
selection button; the menu card strip is located behind the
decal
Are used to select the product for cooking; to use them to start
Cooking Cycles, see Special Program Mode section
A 3-way switch with a center OFF position; turn the switch to
the COOK position to operate the fryer; turn the switch to the
PUMP position to operate the filter pump; certain conditions
must be met before operating the filter pump; these conditions
are covered later in the Filtering Instructions Section of this
manual
Used to manually enter an Idle mode, or Clean-Out Mode
18
Function
Advertisement
Table of Contents
