Table of Contents
Advertisement
3-16.
PROGRAMMING
(CONT.)
July 2003
COPYING
Press (PROG►) to select the presently displayed "COPY A
PROD" option. "COPY __ TO __" shows in display. The first
set of "_" is blinking. Select the product you wish to copy from.
For example, by pressing the 2 button, "COPY 2 TO __" shows
in display.
Next, press product you want to copy to. For example, by
pressing 0 button, the controller responds with a confirmation
message:
"COPY 2 TO 0?"
"1=YES 2=NO"
Press 1 button (YES) and the controller copies product #2 to the
product #0 position (the #2 product is left intact) and the display
shows "* COPIED *", then returns to the "Select Prog Product"
step with the #0 product already selected.
Press 2 button (NO), or don't press any button for 20 seconds.
The controller displays "X CANCELED X" and exits the copy
process. In this case, no changes are made.
ERASING
On the "Select Prog Product" step, press ▼ "** OPTIONS **"
followed by "*1. COPY A PROD" shows in display.
Press▼ three more times to reach the "Erase All" option:
"*2. ERASE A PROD" (erases a single product)
"*3. PRESET A PROD" (sets factory settings)
"*4. ERASE ALL"
Press (PROG►) to select the presently displayed "Erase All"
option. The controller responds with a confirmation message:
"ERASE ALL PROD ?"
"1=YES 2=NO"
Press 1 button (YES) to confirm that you want to erase all
products back to "empty" values. The controller responds by
erasing each product individually.....
"ERASING 1"
"ERASING 2"
"ERASING 3"
"ERASING 4"
"ERASING 5"
then, briefly displays "* ALL ERASED *" and finally, returns to
the "Select Prog Product" display.
44
"ERASING 6"
"ERASING 7"
"ERASING 8"
"ERASING 9"
"ERASING 0"
Advertisement
Table of Contents
