Table of Contents
Advertisement
3-17.
SPECIAL
PROGRAM
MODE
(CONT.)
Oct. 2005
SCHEDULE
m. If "4,SCHED" is selected, "SP-8A" shows in the
display, and
"SCHEDULE". Press the (PROG►) button and up to 4
different times of day can be programmed, by pressing
▼▲.
EX:
SP-8A "SCHEDULE"
SP-8B "SCHEDULE"
SP-8C "SCHEDULE"
SP-8D "SCHEDULE"
Unneeded times should be left at "- - - -",
otherwise,"Filter Suggested" shows in the display,
prompting the operator to start filtering.
Cooking is still permitted during the "suggested"
phase. However, if lockout is enabled, and the fryer
still has not been filtered after one hour, then the con-
troller activates lockout mode and prompts "FILTER
LOCKOUT – YOU *MUST* FILTER NOW".
n. Press (PROG►) and "SP-8E" "SKIP IF LESS
THAN..." shows in the display, followed by the
number of loads between filters, ex: "LOAD 4". In
this example, if the suggested filter time occurs, before
4 loads have been cooked, then the filter operation is
skipped. If more than 4 loads have been cooked, then
"Filter Suggested" shows in the display. The numbers of
loads can be set by pressing ▼▲.
o. Press (PROG►) and "SP-8F" shows in the display,
followed by "LOCKOUT ENABLED?" Press ▼▲ to
choose "YES" or "NO".
p. Press (PROG►) and "SP-8G" shows in the display
followed by SP-8G "LOCKOUT - HEAT OIL..." and
a shortening temperature, when reached, allows the
operator to filter. Example, "LOCKOUT - HEAT OIL...
300F" means the display shows "FILTER LOCKOUT"
"WAIT", until 300F is reached, then display shows
"FILTER LOCKOUT"/"YOU *MUST* FILTER
NOW", and repeated high-low tones are activated.
This prompts the user that it is now time to filter the
shortening. Press ▼▲ to change.
50
followed by
F1: 10.00A
F2: 2.00P
F3: 8.00P
F4: - - - -
Advertisement
Table of Contents
