Table of Contents
Advertisement
11. Measuring with the measuring menus
The quickest way to set the required output format is by pressing
print layouts see Manual 6.6.1).
Change format
Format, adjacent columns ´n´:
Change format
Format, table ´t´:
To start cyclic measuring point scan press
The following symbols will be displayed as verification in the status bar
will be displayed continuously, i.e. so long as the measuring operation is
running.
The start arrow lights up
Lights up when data is being output via the interface
Lights up when measured values are being saved (see 12.1.2)
To stop cyclic measuring point scan press
11.3.3 Memory space, memory output, clearing the memory
When measured values are being recorded the
continuously displays the memory capacity still available. Selecting this function
enables two soft keys, one for direct memory output and one for memory clear-
ing. The output format is as set in the cycle (see 11.3.2 and 12.1.2)
Function
Memory free
To output the memory (see 12.2.6):
To clear the memory
11.3.4 Output menu functions
Each measured value menu, together with all its displayed functions, can be
output via the interface to a printer or computer; (for connection of peripheral
devices, see Manual 5.2). If you have selected the standard display, pressing
the key
will initiate printout of the following protocol.
<PRINT>
Print measured value menu
Measuring point, measured value, designation
ature
°C
°C
Memory capacity - total / free in KB
The protocols for individual functions is listed in Section 6.6.1.
38
ALMEMO
e.g.
®
5690-2M
<FORM>
Cycle timer 00:02:00 Sn
<FORM>
Cycle timer:
<START>
<STOP>
Memory capacity free
Memory free
<PRINT>
<CMEM>
<PRINT>
01: +0023.5 °C Temper-
MAXIMUM VALUE : 01:+0020.0
MINIMUM VALUE : 01:-0010.0
PRINT TIMER:
MEMORY:S0512.1 F0324.4 A
<FORM>
; (for
00:02:00St
´
´
©
´
´
COM
´
´
REC
´
´
ll
function
0378.4
KB
00:01:23
Advertisement
Table of Contents
