Table of Contents
Advertisement
12. Programming using the programming menus
3: Print measured value
4: Start / stop a meas. oper. on level-controlled basis 4: Start-Stop, level-controlled
8: Zero-set a measured value
-5: Execute macro 5 (see Manual 6.6.5)
-6: Execute macro 6
-7: Execute macro 7
-8: Execute macro 8
-9: Execute macro 9
12.6.3 Analog output
For an analog recording of measured values it
is still possible, at sockets A1 and / or A2 (2) to
connect V5 output modules with an analog out-
put, e.g. via recording cable ZA1601-RK
-1.2..2.0 V (see Manual 5.1.1) and to configure
these in the menu Output modules . The new
V6 relay trigger analog module ZA8006-RTA5
offers the option of up to 10 additional sepa-
rately configurable analog outputs at its ports,
with the following possible output signals (see
12.6.2) with the following possible output sig-
nals :
Voltage 0 to 10 V
Current 0 to 20 mA
Programming is as for relay and trigger inputs :
To select socket and port press :
The following output modes can be programmed as variants :
0: Measured value for the selected measuring channel
2: Measured value for a programmed channel :
8: Programmed analog output (see below) :
The analog value appears below this with the units .:
The measured value for the selected measuring channel Mxx is output in
variant 0. In this mode the semi-continuous measuring rate (see 12.1.3) is the
most suitable; the analog output is processed most frequently in this way.
Assigning an analog output to a measuring point
In variant 2 "Assigned internally",
after selecting the Mxx function, you can program the measuring point
to be output :
In this case the continuous measuring rate (see 12.1.3) is better.
Scaling the analog output
80
ALMEMO
0.5 mV / digit
1 µA / digit
®
5690-2M
3: Print
8: Zero-set measured value
-5: Macro 5
-6: Macro 6
-7: Macro 7
-8: Macro 8
-9: Macro 9
*
OUTPUT MODULES
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
ZA 8006-RTA5
Port: 6
Analog extern
2: Assigned int.
Analog value
02:
16.7 °C
Scaling:
6 Analog start:
6 Analog end:
Curr. output:
<P>
:
▲
0: Selected measuring channel M00
2: Assigned internally
8: Driven externally
Analog value :
2: Assigned internally
*
socket B3
Adr.: 36
20 mA
B02
6.456 mA
Temperature
0.0 °C
300.0 °C
4-20mA
M PRINT ESC
or
▼
M01
12.456 mA
02
M
Advertisement
Table of Contents
