Table of Contents
Advertisement
Enter the
end time in format ´
Enter the
start date in format ´
Enter the
end date in format ´
Output the measured value memory in full
Output measuring operation with its number
Output the time frame from start to end
To stop memory output press
The content of the internal memory is output with the same print layout as when
printing; this also applies to multiple outputs in various formats; (this does not
apply for the memory card) (see Manual 6.6.1).
During memory output, in the
output is continuously updated and displayed in KB. The current values for
time-of-day, date, and number are also shown.
Remaining amount of memory to be output
Current number of memory output
Current date and time-of-day of memory output
Clearing the memory
Select the
Memory capacity free
To clear the memory press
● If a memory card is being used, the card will be reformatted and all files will
be deleted.
The full capacity will be shown as available memory.
To cancel press
12.3 Sensor programming
Since on ALMEMO
connector itself, the user will not normally need to reprogram each time. Pro-
gramming will only be necessary e.g. if sensor errors are corrected, if your own
sensors are scaled, or if certain limit values are stipulated; in these circum-
stances there are comprehensive programming functions available.
In the menu
SENSOR PROGRAMMING
tered, viewed, checked, and modified via the keypad providing the sensor con-
nector is plugged in. Please note that series sensors featuring the locking mode
can be protected against unintended alteration and that if modification is re-
quired this locking mode must first be lowered to an appropriate level (see
12.3.4). Functions can only be selected if the locking mode allows; all other
functions remain grayed out.
hh:mm:ss
dd:mm:yy
dd:mm:yy
Remaining output function
function (see 10.4):
®
devices all sensor programming is stored in the ALMEMO
Measured value memory
End time :
´ :
Start date:
´ :
´ :
End date:
<ALL>
<NR>
<TIME>
<STOP>
Remaining output: 12.5 KB
Number:
Time:12:34:56 Date:01.01.04
Memory free: 512.0 KB
<ESC>
all parameters for a channel can be en-
ALMEMO
17:00:00
01.05.00
01.05.00
, the amount still to be
01-001
Memory free : 384.5KB
<CMEM>
®
5690-2M
®
61
Advertisement
Table of Contents
