Programming Using The Programming Menus; Times And Cycles; Date And Time-Of-Day; Cycle With Memory Activation And Output Format - Ahlborn ALMEMO 5690-2M Operating Instructions Manual

Data acquisition system

Hide thumbs Also See for ALMEMO 5690-2M:

Operating instructions manual (36 pages)

Table Of Contents

Table of Contents

12. P

ROGRAMMING USING THE PROGRAMMING MENU

So far in looking at the measuring menus you

have got to know not only the various measur-

ing functions but also a series of functions for

process control and sensor programming.

A comprehensive and systematic list of all pro-

gramming functions is provided here in our de-

scription of the

PROGRAMMING menus

You can access the selection menu from the

measuring

<MENU1>.

For certain programming functions there are

also

WIZARD menus

12.1 Times and cycles

All time functions used for measuring, process

control, and logging purposes can be collated

and programmed in the programming menu

Times - cycles

12.1.1 Date and time-of-day

The ALMEMO 5690-2M incorporates an inte-

grated real-time clock with date and time-of-

day for logging measuring times.

It has a lithium battery so the time and date are

also maintained after battery change. The first

line contains the time-of-day on the left and the

date on the right; by selecting this function (see 10.4) these can be pro-

grammed in the format indicated (see 10.5).

Function Date and time-of-day

Format of time-of-day and date:

12.1.2 Cycle with memory activation and output format

For cyclic saving of and output via the interface of measured values use the

(this corresponds to the print cycle with other ALMEMO

Cycle ;

measuring cycle is no longer implemented). Saving in the cycle, i.e. cyclic

recording of data to the memory, is automatically activated after each reinitial-

ization but can be deactivated as and when required.

The output format (see Manual 6.6.1) defines the print layout for measuring