Ahlborn ALMEMO 5690-2M Operating Instructions Manual page 4

1. Operating controls
Extension of measuring points with selector switch boards
(7) Module U-A10: selector switch board 10 ALMEMO sockets
(j) Measuring inputs 0 to 9
(k) Code switch M:
(8) Module U-MU: selector switch board 10x MU connector
Measuring inputs
Code switch internal: measuring point x:
(9) Module U-TH: selector switch board 10 thermal sockets
Measuring inputs
Code switch internal: measuring point x:
(10) Module U-KS: selector switch board 2x5 clamp connectors
Measuring inputs
Code switch internal: measuring point x:
(11) Module RTA5: Relay - trigger - analog module
4 ALMEMO
x0 to x9
x+10 to x+39
measuring point x:
x0 to x9
x+10 to x+39
x0 to x9
x+10 to x+39
x0 to x9
x+10 to x+39
for 5 orange ALMEMO
Sockets P0/1 TO P8/9
P0/1
P2/3
P4/5
P6/7
P8/9
LED signal lamps
ON
Px
Px
WATCHDOG Drive failure
® 5690-2M
for all ALMEMO sensors
max. 30 additional channels
10 to 90
for analog sensors
without power supply
max. 30 additional channels
10 to 90 on board
for 10 thermocouples
max. 30 additional channels
10 to 90 on board
for analog sensors
without power supply
max. 30 additional channels
10 to 90 on board
® clamp connectors
2 semiconductor relays R0, R1
2 semiconductor relays R2, R3
2 analog outputs (option)
2 analog outputs (option)
2 trigger inputs TR8, TR9
Power supply ON
Act Port active
Inv Port driven inverted