Memory Output - Ahlborn ALMEMO 710 Operating Instructions Manual

10.6 Memory output

The contents of the internal measured value memory can be output via the se-
rial interface either selectively by touching on individual files or in excerpts. For
outputs only table format is now available, as mentioned previously. Certain
sections of the memory can be specified for output - either by stipulating ´Start
time´ to ´Stop time´ or by selecting the ´Number´ defining the measuring op-
erations in question.
In menu ´Data logger´ using tab
the options ´Read out file´, ´Read out time frame´, or ´Read out number´,
and then enter the parameters required.
Start output with key
With external SD memory cards (see 10.1.5) the only option available is to
output in table format all the measured data contained in the file most recently
used.

The most sensible approach in these circumstances is to remove the
memory card and copy all the files needed via a USB card reader di-
rectly onto the PC. These can then be imported either into MS-Excel
or into WinControl (as of V.4.9).
Delete memory content
The button for deleting memory content is located in the bottom line.
However, before memory content is actually deleted, a confirmation window
will open; confirming will clear the storage medium completely; i.e. all files will
be deleted.
select ´Memory output´ and then one of
Start output
ALMEMO
Memory output
Delete memory
® 710 35