Removing The I/O Module; Figure 8: Removing The I/O Module (Example) - WAGO 750-626/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-xxxx/0040-xxxx Design Notes /XTR
Pos : 26.22 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1
5.6.4

Removing the I/O Module

1. Remove the I/O module from the assembly by pulling the release tab.

Figure 8: Removing the I/O Module (Example)

Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Pos : 26.23 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Gefahr/Gefahr: Vorsicht bei der Unter brec hung von F E! - XTR @ 18\mod_1389853538533_21.doc x @ 142058 @ @ 1
Use caution when interrupting the FE!
With I/O modules for 220/230 VAC, make sure that people or equipment are not
placed at risk when removing an I/O module and the associated FE interruption
(function grounding). To prevent interruptions, provide ring feeding of the ground
conductor, see section "Grounding".
Pos : 27 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
Assembly 31