Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750 XTR
750-xxxx/0040-xxxx Design Notes /XTR
Pos : 25 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 1M ontag e - Ü bersc hrift 1 @ 15\mod_1366723611709_21.doc x @ 117655 @ 1 @ 1
5
Assembly
Pos : 26.1 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Einbaul age XTR @ 16\mod_1373976754254_21.doc x @ 126292 @ 2 @ 1
5.1
Mounting Position
The following mounting positions are approved:
•
Lying horizontal
•
Standing horizontal
•
Vertical
Use an end stop in the case of vertical installation!
When installed vertically, also mount an end stop below the fieldbus node to
protect the fieldbus node against sliding.
WAGO item number 249-116
WAGO item number 249-117
Pos : 26.2 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/Gesamtaus bau XTR @ 16\mod_1373976975062_21.doc x @ 126295 @ 2 @ 1
5.2
Overall Configuration
The maximum total length of a fieldbus node without fieldbus coupler/controller
is 780 mm including end module. The width of the end module is 12 mm. When
assembled, the I/O modules have a maximum length of 768 mm.
Examples:
•
64 I/O modules with a 12 mm width can be connected to a fieldbus
coupler/controller.
•
32 I/O modules with a 24 mm width can be connected to a fieldbus
coupler/controller.
Exception:
The number of connected I/O modules also depends on the type of fieldbus
coupler/controller is used. For example, the maximum number of stackable I/O
modules on one PROFIBUS DP/V1 fieldbus coupler/controller is 63 with no
passive I/O modules and end module.
Observe maximum total length of a fieldbus node!
The maximum total length of a fieldbus node without fieldbus coupler/controller
may not exceed 780 mm.
Also note the limitations of individual fieldbus couplers/controllers.
Pos : 26.3 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/M ontage auf Tr agschi ene ( XTR) @ 24\mod_1444997402760_21.doc x @ 193805 @ 233 @ 1
Manual
Version 1.2.0
end stop for TS 35, 6 mm wide
end stop for TS 35, 10 mm wide
Assembly
23
Advertisement
Chapters
Table of Contents
