Alcatel-Lucent 7705 SAR System Management Manual page 87

router
Syntax router router-instance
no router
Context config>system>security>management-access-filter>ip-filter>entry
config>system>security>management-access-filter>ipv6-filter>entry
Description This command configures a router name or service ID to be used as a management access filter match
criterion.
The no form of the command removes the router name or service ID from the match criteria.
Parameters router-instance — specifies one of the following parameters for the router instance:
src-ip
Syntax src-ip {ip-prefix/mask | ip-prefix netmask}
no src-ip
Context config>system>security>management-access-filter>ip-filter>entry
Description
This command configures a source IPv4 address range to be used as a management access filter match
criterion.
To match on the source IP address, specify the address and the associated mask (for example, 10.1.0.0/
16). The conventional notation of 10.1.0.0 255.255.0.0 can also be used.
The no form of the command removes the source IP address match criterion.
Default
n/a
Parameters
ip-prefix — the IP prefix for the IP match criterion in dotted-decimal notation
mask — the subnet mask length expressed as a decimal integer
netmask — the subnet mask in dotted-decimal notation
7705 SAR OS System Management Guide
router-name — specifies a router name up to 32 characters to be used in the match criteria
service-id — specifies an existing service ID to be used in the match criteria
Values
1 to 2147483647
Values
0.0.0.0 to 255.255.255.255 (IP prefix), 1 to 32 (mask length)
Values
a.b.c.d (network bits all 1 and host bits all 0)
Security
87