Table of Contents
Advertisement
Security Command Reference
802.1x Commands
dot1x
Syntax
[no] dot1x
Context
config>system>security
Description
This command creates the context to configure 802.1x network access control on the 7705 SAR.
The no form of the command removes the 802.1x configuration.
radius-plcy
Syntax
[no] radius-plcy name [create]
Context
config>system>security>dot1x
Description
This command creates the context to configure RADIUS server parameters for 802.1x network access
control on the 7705 SAR.
The RADIUS server configured under the config>system>security>dot1x>radius-plcy context
authenticates clients who get access to the data plane of the 7705 SAR. This configuration differs from
the RADIUS server configured under the config>system>security>radius context that authenticates
CLI login users who get access to the management plane of the 7705 SAR.
The no form of the command removes the RADIUS server configuration for 802.1x.
Parameters
name — the RADIUS policy name, up to 32 characters
create — keyword required when first creating the configuration context. When the context is
retry
Syntax
retry count
no retry
Context
config>system>security>dot1x
Description
This command configures the number of times the router attempts to contact the RADIUS server for
authentication if there are problems communicating with the server.
The no form of the command reverts to the default value.
Default
3
128
created, you can navigate into the context without the create keyword.
7705 SAR OS System Management Guide
Advertisement
Table of Contents
