Table of Contents
Advertisement
Log Command Reference
notify-community communityName | snmpv3SecurityName — specifies the community string
community — the community string as required by the snmpv1 or snmpv2c trap receiver. The
security-name — the security name as defined in the config>system>security>user context for
security-level {no-auth-no-privacy | auth-no-privacy | privacy} — specifies the required
290
The keyword snmpv1 selects the SNMP version 1 format. When specifying snmpv1, the
notify-community parameter must be configured for the proper SNMP community string
that the trap receiver expects to be present in alarms and traps messages. If the SNMP version
is changed from snmpv3 to snmpv1, then the notify-community parameter must be changed
to reflect the community string rather than the snmpv3securityName that is used by snmpv3.
The keyword snmpv2c selects the SNMP version 2c format. When specifying snmpv2c, the
notify-community parameter must be configured for the proper SNMP community string
that the trap receiver expects to be present in alarms and traps messages. If the SNMP version
is changed from snmpv3 to snmpv2c, then the notify-community parameter must be
changed to reflect the community string rather than the security-name that is used by snmpv3.
The keyword snmpv3 selects the SNMP version 3 format. When specifying snmpv3, the
notify-community parameter must be configured for the SNMP security-name. If the SNMP
version is changed from snmpv1 or snmpv2c to snmpv3, then the notify-community
parameter must be changed to reflect the security-name rather than the community string used
by snmpv1 or snmpv2c.
Values
snmpv1, snmpv2c, snmpv3
Default
snmpv3
for snmpv1 or snmpv2c, or the snmpv3 security-name. If no notify-community parameter
is configured, then no alarms or traps will be issued for the trap destination. If the SNMP
version is modified, the notify-community parameter must be changed to the proper form for
the SNMP version.
community string can be an ASCII string up to 32 characters in length.
SNMP v3. The security-name can be an ASCII string up to 32 characters in length.
authentication and privacy levels required to access the views configured on this node when
configuring an snmpv3 trap receiver.
The keyword no-auth-no-privacy specifies that no authentication and no privacy
(encryption) are required.
The keyword auth-no-privacy specifies that authentication is required but no privacy
(encryption) is required. When this option is configured, the security-name must be
configured for authentication.
The keyword privacy specifies that both authentication and privacy (encryption) are
required. When this option is configured, the security-name must be configured for
authentication and privacy.
Values
no-auth-no-privacy, auth-no-privacy, privacy
Default
No default. The security level must be specified when configuring
an SNMPv3 trap receiver.
7705 SAR OS System Management Guide
Advertisement
Table of Contents
