Table of Contents
Advertisement
Security Command Reference
acct-port — the UDP port number used to contact the RADIUS server for accounting requests
server-type — the server type
source-address
Syntax
source-address ip-address
no source-address
Context
config>system>security>dot1x>radius-plcy
Description
This command configures the NAS IP address to be sent in the RADIUS packet.
The no form of the command reverts to the default value.
Default
system IP address
Parameters
ip-address — the source address of the RADIUS packet in dotted-decimal notation
shutdown
Syntax
[no] shutdown
Context
config>system>security>dot1x
config>system>security>dot1x>radius-plcy
Description
This command administratively disables the 802.1x protocol operation. Shutting down the protocol
does not remove or change the configuration other than the administrative state.
The operational state of the entity is disabled as well as the operational state of any entities contained
within.
The no form of the command administratively enables the protocol.
Default
shutdown
130
Values
1 to 65535
Values
authorization, accounting, or combined
Values
0.0.0.0 to 255.255.255.255
7705 SAR OS System Management Guide
Advertisement
Table of Contents
